How to Replace a UPVC Door Replacement Lock
If the lock on your door is jammed or doesn't function in the way it should, you may be looking to replace it. It may sound complicated, but the process is simple and does not require a locksmith professional.
A few basic tools and a little patience and plenty of care should do the trick. Here's how to do it:
Measure the Door
If you're having trouble locking your uPVC door or it isn't closing or lock properly, it may be time for a replacement. Whether you've recently moved house or a tenant left without returning the keys, or your multipoint gear box is showing signs of wear and tear, it's easy to change the barrel of your lock for an alternative that offers an additional layer of security.
It is necessary to take measurements prior to purchasing an entirely new lock. This will ensure that the new cylinder will fit properly and not compromise the security of your home. The backset is the most critical. This is the distance that runs from the middle of the keyhole bore hole to the edge of the door. It's typically 2 3/8 or even 2 3/4 inches. Use an measuring tape or ruler to measure this and record the results on paper or a notepad.
You should also know what the thickness of the faceplate is. This is the thickness that the part covers the lock mechanism. If you can, purchase an alternative lock from the same manufacturer since they are constructed to the same dimensions. If you cannot find the name of the manufacturer or mark, just determine the width of the current cylinder. You can also verify this by placing a pencil over the keyhole and measuring from the bottom of the lock to the centre of the pencil mark on each side of the cylinder.
Once you have the measurements, you can start removing the old cylinder. Start by loosening the screw holding the handle with the Phillips-head driver, and then loosen the screws that hold the handles' exterior and interior to one another. Once these screws are removed, you are able to take off the barrel screw on the handle's exterior and remove the cylinder.
If the cylinder becomes stuck in the lock, you could try using WD-40, or another oil or lubricant. It's important to not force it out - forcible turns could damage the internal gearbox and lead to further issues with your lock. Consider upgrading to a lock that has anti-snap, anti-bump and anti-snap protection. This will make it more resistant to attacks from thieves.
Source the Lock
When buying the latest door lock, you need to consider a few aspects. To ensure that the lock is of good quality and fits ensure you purchase the correct size cylinder and from a trusted manufacturer. You'll require a few basic tools to complete the task, including an screwdriver as well as a mallet made of rubber.
There are a variety of signs that your lock made of upvc is wearing out and requires to be replaced. The lock may have visible damage or the handle may be loose and not fit correctly. If the lock is jamming or isn't locking at all then it's time to consider replacing it.
After you've chosen the best lock, you must install it correctly so that it operates correctly and locks securely. Follow the manufacturer's directions to install the new multipoint lock mechanism to the door's upvc panel and attach the correct handles and faceplates. Once everything is in place check the mechanism by locking and unlocking the door from inside and out. If everything looks good you're ready to celebrate your achievement.
It may seem difficult to change the lock on a upvc but you can do it yourself with the assistance of locksmith. By recognizing the signs that your lock is in need to be replaced and having the necessary tools available it's an easy task.
Remember that like any moving part, a upvc door lock could benefit from lubrication to run smoothly. A few sprays of silicone or a graphite powder lubricant could assist in extending their lifespan by keeping them free from excess friction that can cause premature wear and tear. Regularly cleaning your door's lock mechanisms with WD-40 and a damp cloth is a good way to keep them in great condition.
Take out the Cylinder
If you're having difficulty with your upvc doors and windows, it could be time to replace the barrel on your lock. This is a straightforward DIY project and can be completed in few minutes. It's an effective method to ensure your home security. The most important thing to remember is to identify the brand of your existing lock to ensure that you find an appropriate replacement.
A door lock that is broken can be a major inconvenience and can create a serious security risk. It's not uncommon for locks on uPVC doors to fail, and it's important to ensure regular maintenance. In fact, experts recommend that you change your locks every seven years. However, if your lock is in a state of extreme damage or you're not happy with its performance, it's worth considering professional help from an expert.
For uPVC it is a pin system, referred to as a euro cylinder will be used in most cases. They are easy to use and rarely break down, but can still be vulnerable. It's a good idea to replace your lock with a more modern model that has anti-snap, anti-bump and anti-snap security to stop burglaries.
The first step to changing your uPVC locks is to take off the handle. This will expose the old cylinder. This can be difficult because there are often some screws hidden beneath the handles, so ensure you have a screwdriver in your bag. The next step is to gently pull and move the cylinder until it loosens. When it is loose then you can remove it out of its socket.
When you have found a replacement that is suitable then simply screw it into place and reverse the removal process. Be careful not to over tighten because this can cause the cylinder to get stuck inside the door and not work as it should. Test the uPVC replacement lock by opening it and closing it from inside and outside. You should now be in a position to lock and unlock it using your key! If not, ensure the screws are tightened and try again.
Install the Lock
Do some research to make sure the lock you choose is the right one for your door. You'll have to be aware of your faceplate and backset dimensions which is the distance between the edge of the front door and the centre of the handle/cylinder - along with the type of lock in order to make sure that the new lock is properly fitted without compromising security.
Once you've finished that, it's time to start installing the new lock. Ideally, prop the door open or secure it safely so that it won't close during the process. To start, use a Phillips-head driver to loosen the screws that hold the handle in place. After they've been removed, you should be able to slide the handle's inner and outer apart.
Now you can begin to remove the old cylinder. This is something you'll want to do by unscrewing it from its barrel. Once you've removed your cylinder then you'll be able to install the replacement lock, ensuring that you follow the directions for your specific model. Once the lock is in place, you can test the new lock by opening and closing the door from the outside and inside, locking and unlocking it from the inside and then retesting it.
There are a variety of reasons why you might need to change the lock on your uPVC doors. You might have recently moved in and not had an entry key. The previous tenant might not have returned the key. You may also need to upgrade your lock to one that is more secure. Whatever the reason changing the lock's cylinder is easy and should take just five minutes.
No matter if you have a multipoint lock or single-point lock, they all work with the same basic mechanism. They can have problems, such as closing issues or jam. This can be due to wear and wear, weather conditions, or simply from everyday use. repairmywindowsanddoors of these issues are easily solved with a bit of maintenance or hiring locksmiths.